The 2011 Ford Focus has 7 problems reported for locks won't lock or unlock. Average repair cost is $480 at 56,750 miles. C-Max Energi; C-Max Hybrid; Contour; My door locks work sometimes KEYS AND LOCKS. Door Locks and Alarms (9) Garage Door Opener (2) Key Fob and Remote Start (7) MyKey (7) Replace and Reprogram Keys (15) SecuriCode Keyless Entry Keypad (7) Got the door card off! Unfortunately, I've not managed to get the door open. 1) Pryed off the door-opening handle surround. 2) Pryed off the bottom of the door-grab bar. 3) Undid two bolts in the door grab bar. 4) Removed the window winder - it's held on with a U-shaped clip inside. 2. Name: Jack. Ford Model: C-Max. Ford Year: 2004. UK/Ireland Location: Bedfordshire. Posted February 6, 2012. I seem to recall that my 54 plate 2.0TDCi Zetec had a security function which automatically locked all doors after a set time when parked - providing the key was not in the ignition, the doors were closed but hadn't been locked with A chime sounds when the feature is. enabled or disabled. Locks and Security. • To program the autounlock feature, press the power door lock control. for less than 1 second and release. Each short press of the power. door lock control toggles the state of the autounlocking feature. between enabled and disabled. Possible that your door lock is stiff due to non-use. Unfortunately there's no other way in other than jimmying the door lock or calling a locksmith. There is what looks like a regular 'old school' key that was on the same ring as the fob. Yes, as far as i know the fobs are original. Problem is the key from inside the fob doesn't go in all the way. TSB 13-12-13. INTELLIGENT ACCESS SMART UNLOCK INOPERATIVE. Publication Date: November 28, 2013. FORD: 2013 C-MAX. 2013-2014 Focus FORD: 2013-2014 Escape ISSUE: Some 2013 C-MAX, 2013-2014 Escape and Focus vehicles equipped with Passive Entry-Passive Start (PEPS) and Intelligent Access (IA) may exhibit a customer concern of intermittent IA Smart In order to remove the door panel of the Ford C-Max you must first remove the red cap at the bottom to be able to loosen its screw underneath. Together with this, the screws located near the locking mechanism, in the seat of the internal handle and near the window control panel, must also be loosened. Once the screws have been loosened, it will xT82.