#Bonnetrepair Ford Focus Bonnet won't open Repair (UK) this can be done cheaply and on your drive Here is my channel wish list if you would like to show some This video shows you how to open the hood in your 2013 Ford C-Max. Popping the hood, or bonnet, on your C-Max is a two step process, you need to release the hood latch inside your C-Max and then you need to release the safety latch under your hood in the front of your C-Max. The video above shows you the location of both hood latches. Also had this problem and the answer is fairly simple. remove the plastic cover around the latch. feel along the cable until you find a peg holding the cable to the fan housing. Loosen the peg, and the cable will operate freely. it appears to pull the cable out of line,causing the inner wire to bind. If your bonnet won't open on your Ford Focus. This video will help you carry out the simple repair, Step by step. Stick around until the end for the guide of Do you need to open bonnet on your Ford Transit (2000 - 2006) but don't know where to start? This video tutorial shows you step-by-step how to do it!Our Ford If your bonnet lock breaks on your MK7 Ford Transit, there is no way to open it, unless you remove and replace the lock. This happened to me, so follow along Ford EcoSportHow to Open the Bonnet: To open the bonnet of Ford EcoSport you need to follow these basic steps. To open the bonnet, you need to pull a button Hi there, I have a 56 plate Ford Focus and the bonnet catch has broken. I have a replacement kit and and need some advice on on how to open the bonnet with the least damage. Can you help please. The c … read more If you still cannot get the bonnet open then the ONLY way to access it open it is to remove the 2 x 10 mm volts from the bonnet latch from underneath the vehicle. This is tight on the focus /c-max but manageable. Ok with the undershield dropped down remove the 4 x10 mm bolts that secure radiator bracket remove/drop the radiator downward this SOURCE: Bonnet cable snapped, need advice on how to open bonnet hmm u mite have to grab the rest of the cable if any left in the catch part of the lock under the bonnet and pull it with pliers.failing that get a screw driver and see if u can push the catch to release the bonnet through the grill.failling that undo the lock through the grill with a rachet usually 10mm socket hope this helps.. etIWh.